1.安装squid（全程使用root账号，如使用其他请注意权限问题）
yum install squid
2.生成代理的账号密码
#如果没有htpasswd命令 先安装
sudo yum install httpd-tools
#zsp为用户名，按自己实际情况替换
htpasswd -c /etc/squid/passwd zsp
2.配置/etc/squid/squid.conf
红色部分为调整
# Recommended minimum configuration:
# # Example rule allowing access from your local networks.
# Adapt to list your (internal) IP networks from where browsing
# should be allowed
acl localnet src 0.0.0.1-0.255.255.255 # RFC 1122 "this" network (LAN)
acl localnet src 10.0.0.0/8 # RFC 1918 local private network (LAN)
acl localnet src 100.64.0.0/10 # RFC 6598 shared address space (CGN)
acl localnet src 169.254.0.0/16 # RFC 3927 link-local (directly plugged) machines
acl localnet src 172.16.0.0/12 # RFC 1918 local private network (LAN)
#配置为公网ip
acl localnet src 192.168.1.131/16 # RFC 1918 local private network (LAN)
acl localnet src fc00::/7 # RFC 4193 local private network range
acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) machines acl SSL_ports port 443
acl Safe_ports port 80 # http
acl Safe_ports port 21 # ftp
acl Safe_ports port 443 # https
acl Safe_ports port 70 # gopher
acl Safe_ports port 210 # wais
acl Safe_ports port 1025-65535 # unregistered ports
acl Safe_ports port 280 # http-mgmt
acl Safe_ports port 488 # gss-http
acl Safe_ports port 591 # filemaker
acl Safe_ports port 777 # multiling http
acl CONNECT method CONNECT #
# Recommended minimum Access Permission configuration:
#
# Deny requests to certain unsafe ports
http_access deny !Safe_ports # Deny CONNECT to other than secure SSL ports
http_access deny CONNECT !SSL_ports # Only allow cachemgr access from localhost
http_access allow localhost manager
http_access deny manager # We strongly recommend the following be uncommented to protect innocent
# web applications running on the proxy server who think the only
# one who can access services on "localhost" is a local user
#http_access deny to_localhost #
# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS
# # Example rule allowing access from your local networks.
# Adapt localnet in the ACL section to list your (internal) IP networks
# from where browsing should be allowed
#http_access allow localnet
#配置允许外部访问
http_access allow all
http_access allow localhost # 配置的密码地址 /etc/squid/passwd为上面设置账户命令的地址
auth_param basic program /usr/lib64/squid/basic_ncsa_auth /etc/squid/passwd
auth_param basic children 5
auth_param basic realm Proxy Authentication Required
auth_param basic credentialsttl 2 hours
auth_param basic casesensitive off
#允许的用户 改成上面生成账号的用户
acl auth_users proxy_auth zsp
http_access allow auth_users # And finally deny all other access to this proxy
http_access deny all # Squid normally listens to port 3128
#暴露的端口，此端口需要开防火墙
http_port 1001 # Uncomment and adjust the following to add a disk cache directory.
#cache_dir ufs /var/spool/squid 100 16 256 # Leave coredumps in the first cache dir
coredump_dir /var/spool/squid #
# Add any of your own refresh_pattern entries above these.
#
refresh_pattern ^ftp: 1440 20% 10080
refresh_pattern ^gopher: 1440 0% 1440
refresh_pattern -i (/cgi-bin/|\?) 0 0% 0
refresh_pattern . 0 20% 4320
3.开启服务
#开启
systemctl start squid
#停止
systemctl stop squid
#重启
systemctl restart squid
#查看状态
systemctl status squid
4.查看运行状态
5.微信代理连接
输入conf文件配置的服务器ip和端口，端口需开放防火墙端口。
